Beds

Before you start#

Only add beds to rooms you genuinely rent per person. See the decision table in Properties overview.

1. Create a bed#

1. Open the form

   Go to Properties → Beds and press (+).

2. Fill in the fields

   項目	必須	説明
   Building and room	必須	The room the bed belongs to.
   Name	必須	How the bed is identified, e.g. "Bed 1", "Upper A".

3. Repeat for every bed in the room

   Occupancy is counted per bed, so a room with three of four beds filled is not "occupied".

2. What changes once a room has beds#

As soon as a room has active beds, the bed field becomes required on leases, reservations, invoices and short-term bookings for that room. Forms for that room will not save without it.

• A lease is signed against a bed, not the room.
• Shared services for the room are split across occupied beds by the rule set on the service.
• Vacancy and occupancy reports count beds, not rooms.

3. Splitting shared costs#

Decide how shared electricity and water are split before the first invoice: evenly across beds, or by occupants.

Changing the split rule later does not recalculate invoices that were already issued.